U-Line H-9620, Руководство пользователя

Страница: 3 / 9

PAGE 3 OF 9 1021 IH-9620
BASE TABLE
Hardware pack includes:
DESCRIPTION QTY
1/4"-20 x 5/8" Bolts 46
1/4"-20 Nuts 30
Lock Washers 30
NOTE: There are four mounting channels
provided for installing an optional cabinet or
drawer.
1. Align leg holes to end of tabletop. Secure with six
1/4"-20 x 5/8" bolts. Threaded inserts are provided on
each tabletop end. (See Figure 4)
NOTE: Center leg will secure with four
1/4"-20 x 5/8" bolts.
2. Set bench assembly upright and recheck all bolts
for tightness.
L-EXTENSION
1. Align leg holes to end of tabletop. Secure leg (2)
with eight 1/4"-20 x 5/8 " bolts. Threaded inserts are
provided. (See Figure 4)
2. Secure L-leg (6) with four 1/4"-20 x 5/8" bolts.
Threaded inserts are provided. (See Figure 5)
3. Set bench assembly upright and recheck all nuts,
bolts and screws for tightness.
NOTE: Do not lean on table. You may need to
prop up corner without leg until table is fully
assembled.
L-TABLE
1. With both table assemblies upright, slide L-extension
underneath base table on right or left hand side.
Make sure that table corners align and that the six
bolt locations closest to the center of the leg align
with the holes on the edge of the base tabletop.
(See Figure 6)
2. Attach L-leg (6) to underside of 96" top (5) with six
nuts, bolts and lock washers.
STEEL TOP ASSEMBLY
Figure 4
Figure 5
Figure 6
1-800-295-5510
uline.com