U-Line H-9554, Безопасность

Страница: 21 / 69

PAGE 21 OF 69 1021 IH-9554
TECHNICAL DATA CONTINUED
CONNECTIONS FOR RS232
The 9-pin female subminiature "D" connector COM1,
is provided for interfacing to other devices. The pin
connections are as follows:
Active pins: PIN 2 = TXD, PIN 3 = RXD, PIN 5 = Ground
PRINTOUTS
The following sample print outs are generated by the
Print button, "P" Command or alternate print command.
The content of the printout is defined in the Print Content
menu item.
DESCRIPTION COMMENT
Part Number Line If Printx > Content > P/N is on
Result line If Printx > Content > Result is on
Gross value line
If Printx > Content > Gross is on and a tare
value is entered
Net value line
If Printx > Content > Net is on and a tare
value is entered
Tare value line
If Printx > Content > Tare is on and a tare
value is entered
APW line If Printx > Content > APW is on
Accumulation line If Printx > Content > Accu is All
OUTPUT FORMAT
The printout string has a fixed length of 22 characters for
most applications except check weighing. For check
weighing mode, the printout string has a fixed length of
29 characters.
CHECK WEIGHING APPLICATION
FIELD LENGTH
Weight
(right aligned)
11
Space 1
Unit
(right aligned)
5
Space 1
Stability (?) 1
Space 1
FIELD LENGTH
T/N/G/PT
(right aligned)
2
Space 1
Application Status
(right aligned)
6
Term. 2
NON-CHECK WEIGHING APPLICATION
FIELD LENGTH
Weight
(right aligned)
11
Space 1
Unit
(right aligned)
5
Space 1
Stability (?) 1
Space 1
T/N/G/PT
(right aligned)
2
Term. 2
Each field is followed by a single delimiting space
(ASCII: 32).
DEFINITIONS
• Weight – Up to 11 characters, right justified, at
immediate left of most significant character
(if negative).
• Unit – Up to five characters, right justified. If the Unit
in the Print Content menu was set to off, the unit will
be removed in the weight string and replaced by
spaces.
• Stability – "?" character is printed if not stable. If
weight is stable a space is printed.
• T/N/G/PT – "T" is printed for a tare weight, "N" printed if
weight is net weight, "G" or nothing printed if weight
is a gross weight, "PT" is printed if the tare weight is
Pre-set Tare.
• Application Status (for Check) – Fixed to six
characters. Display status like "Under", "Accept" and
"Over" for check weighing.
• Terminating Character(s) – terminating character(s)
printed depending on FEED menu setting.
5
9 8 7 6
4 3 2 1
Figure 7