PAGE 5 OF 24
0721 IH-9236
13. Loosely fasten the alligator straps and attach to
canopy top at each side of the corners around
eave poles (EV) to secure tent top. (See Figure 19)
14. Attach base plates to legs and secure with frame
pin. (See Figure 20)
15. Lift downwind side of frame and keep all sides level.
Attach leg poles to the lifted side. (See Figure 21)
NOTE: Always lift the downwind side of tent first.
16. Raise other side of tent and attach remaining legs.
(See Figure 22)
17. Fasten the rest of the alligator straps around eave
poles (EV) by tugging on the excess strap to keep
the material taut and pulling the straps firmly. Slide
excess strap through the metal slide on the alligator
clip. (See Figure 23)
CAUTION! Yanking on straps will cause undue
wear and tear as well as wrinkling of tent top
fabric.
IF USING STAKES (H-9236)
1. Place stakes 5' out from each leg. Drive stakes into
the ground until 6" or less of the stake shows.
(See Figure 24)
Figure 20
Frame
Pin
Leg
Base
Plate
Figure 19
Alligator Strap
Figure 21
Wind
ASSEMBLY CONTINUED
Figure 23
Figure 22
Figure 24
Pull to tighten.
