manualshive.com logo in svg

U-Line H-8520, Руководство пользователя

Поделиться
Скачать
U-Line H-8520 Скачать руководство пользователя страница 2

PAGE 2 OF 9 

0521 IH-8520

ATTACH LEGS

1.  Place the bottom tray (with casters) upright. Lock the 

swivel casters. (See Figure 2)

2.  Attach leg to the outside of tray with four 5/16 x 1/2" 

bolts and four 13 mm nuts.

NOTE: Position leg so two holes near middle are 

closer to bottom tray.

NOTE: Ensure that bolt heads face outward.

3.  Repeat Step 2 for the remaining three legs.

4.  Completely tighten all bolts.

ATTACH STRUTS

1.  Attach long strut to the inside of the legs with two 

5/16 x 1/2" bolts and two 13 mm nuts. (See Figure 3)

NOTE: Ensure that the strut lip faces inward and 

downward.

2.  Repeat Step 1 for the second long strut.
3.  Attach short strut to the inside of the legs with two 

5/16 x 1/2" bolts and two 13 mm nuts.

NOTE: Ensure that the strut lip faces inward and 
holes face upward.

4.  Repeat Step 3 for the second short strut.

5.  Completely tighten all bolts.

ATTACH CHEST

1.  Place chest inside legs. Make sure that holes at the 

top of the legs align with holes on chest. 
(See Figure 4)

2.  Choose which side to install handle. On the side 

without the handle, thread four 5/16 x 1/2" bolts 
and four 13 mm nuts to each corner. On the side 
where handle will be installed, only thread two 
5/16 x 1/2" bolts and two 13 mm nuts on top, leaving 
the bottom holes open.

ASSEMBLY CONTINUED

Figure 3

Figure 2

Figure 4

Short Strut

Long Strut

Содержание H-8520










Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды