PAGE 4 OF 7
0219 IH-7862
INSTALLATION CONTINUED
10. Once cable has been passed through hole,
connect each end to respective terminal, placing
each one in the right path. Close box. (See Figure 6)
11. After installing cable, replace screws to close cover.
(See Figure 7)
12. Place hand dryer on wall bracket. (See Figure 8)
13. Remove air intake filter and secure hand dryer
through inner hole. Insert filter and connect unit.
(See Figure 9)
14. After installation, wait six minutes for electrical
calibration then test hand dryer by placing hands
inside drying cavity. As soon as hands are removed
air flow should stop.
Figure 6
Figure 7
Figure 8
Air Intake
Filter
Figure 8
