U-Line H-5647, Руководство пользователя

Страница: 2 / 9

PAGE 2 OF 9 0123 IH-5647
NOTE: Teflon tape should be applied to all
threading prior to assembly to ensure airtight
connection. Wrap up to six times.
NOTE: Teflon tape must be applied clockwise
around the threads.
1. Check to see if all parts are included.
2. Screw discharge spout (1) into casing (3) using PTFE
sealant tape provided.
CAUTION! Do not use pipe sealant.
3. In order to avoid leakage, use PTFE sealant tape
(included) to seal tail pipe (19) with two suction
tubes (20).
4. Screw assembled suction tube into casing (3).
5. Screw assembled handle to crank arm (12). Keep
handle shaft from turning. Tighten hex nut (18)
against crank arm. Then, insert crank arm assembly
onto rotor shaft and tighten in the rotor shaft.
6. Insert assembled pump into drum through bung
adapter (14) and hand-tighten the thumb screw (15).
Be sure to set pump and assembled suction tube so
that the suction tube is at the desired depth in the
drum and is not blocked.
# DESCRIPTION QTY.
1 Discharge Spout 1
2 Barb Spout 1
3 Casing 1
4 Rotor Assembly 1
5 Vane 2
6 Spring 1
7 Spring Rod 1
8 Lip Seal 1
9 O-RIng 1
10 Front Cover 1
11 Cap Screw 5
12 Crank Arm 1
13 Handle 1
14 Bung Adapter 1
15 Thumb Screw 1
16 Cap Screw 1
17 Handle Shaft 1
18 Hex Nut 1
19 Tail Pipe 1
20 Suction Tube 2
5
4
7
8
9
6
5
20
13
17
10
11
20
19
3
1
2
14
15
12
16
18
ASSEMBLY AND INSTALLATION