PAGE 2 OF 9
1120 IH-2674
ASSEMBLY CONTINUED
4. Pull the frame completely out until all sliders are
engaged over the snap buttons at each corner on
each leg. Push up on sliders to get buttons to lock
in place. Unit may need to move around, by pulling
and opening until completely open and locked.
(See Figure 4)
5. With a partner, go to legs on opposite side of the
canopy. Extend by releasing the leg button and
sliding out the lower leg. Use foot on bottom of leg
to hold the leg in position. This will allow the leg to
extend smoothly. (See Figure 5)
6. Repeat this step on the other side.
7. To secure and tighten fabric top, attach the hook
and loop straps sewn to the fabric top in the center
on each side, around the bottom truss bar.
(See Figure 6)
8. Use the large nail stakes to secure the feet at each
leg position.
Figure 4
Slider
Figure 5
Hook
and
Loop
Figure 6
