PAGE 4 OF 7
0421 IH-1630
1. Lift up on handle to
release lock.
2. Move upper handle forward to expose
wing nuts and angle bracket.
3. Remove the wing
nuts and bolts from
both upper and lower
handle. Discard the
angle bracket.
4. Lift upper handle and
place end-to-end against
lower handle, lining up
the holes for the bolts.
Slide handle sleeve
downward until all holes
are lined up.
5. Use a screwdriver to line
up holes and guide bolts
through the handle.
6. Handle sleeve and bolts
will look like this when they
are properly installed.
7. Attach lock nuts on bolts
and fasten tightly.
8. Remove wing nuts and washers
to unfasten shipping carton.
Discard shipping carton.
9. Secure the handle release lock. Tip
the side of the carton where the
wheels are located on its side and
roll the machine out of the carton.
HOW TO REMOVE MACHINE FROM SHIPPING CARTON
