PAGE 4 OF 12
0222 IH-10012
OPERATING ISSUE
RECOMMENDATIONS
Printer not working at setup.
Included DYMO software needs to be installed on computer in order for it to
recognize printer.
Clearing label jams.
Tear off any labels that have already fed through the printer.
Press the label release lever forward and pull the jammed label out of the label
feed slot.
Labels do not feed correctly.
Make sure labels are loaded properly and that the left edge of the label is
aligned with the left edge of the label feed slot. See "Loading Labels" on page 2.
Several blank labels print.
Sensors need to be cleaned.
Does not print.
Verify labels are Dymo brand only. Other brands of labels will not work in this
printer.
1-800-295-5510
uline.com
TROUBLESHOOTING CONTINUED
