QUICK START GUIDE
17
Set Nitrogen Pressure
The pressure should be set around 20 - 30 PSI. Start at 25
PSI on regulated gauge; 7 PSI at infuser regulator.
1. Make sure red regulator valve is in the OFF position.
2. On top of Nitrogen tank, turn black handle
counterclockwise until it stops.
3. Rotate the red regulator valve to ON Position; turn
counterclockwise 1/4 turn until it stops
4. To adjust pressure, loosen locking nut, turn adjusting
screw until desired pressure is reached, and retighten
locking nut.
Lock
Unlock
Adjusting
Screw
Locking
Nut
Regulated
Gauge
Tank Pressure
Gauge
5. On infuser regulator, pull out middle knob to unlock
then turn knob until needle points at 7 - turn right to
increase; left to decrease.
6. Once set, lock in place by pressing middle knob in until
it clicks.
