USER GUIDE
Control Operation - Service 7
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE •
SERVICE
6. Press Select to confirm setting.
To exit the Set Points menu use Up to select “Return to
Menu” and press Select to confirm.
Factory Default
Factory Default will restore all settings to their factory
default.
To access Factory Default
1. Use Down to select “Factory Default”.
2. Press Select .
To restore settings to their factory default.
3. Use Down to select “Restore?” and press Select
4. “Restore?” will change to “Restoring...” while settings
are restored. When restoration is complete,
“Restoring...” will return to “Restore?”.
To exit Factory Default use Up to select “Return to
Menu” and press Select to confirm.
Re-Select Model
NOTICE
Before altering model selection U-Line customer
service must be notified. Failure to notify
customer service will result in voiding of the
manufacturer warranty.
Re-Select Model allows the units model information to be
modified. Changing the units model completely
reprograms available zones, relay assignments, DC output
assignments etc.
To access Re-Select Model
1. Use Down to select “Re-Select Model”.
2. Press Select .
To alter model setting.
3. Use Down to select “Model=” and press Select .
“Model” will begin to flash.
4. Press Up or Down to scroll through each
available model.
5. Press Select to confirm.
To exit Re-Select Model use Up to select “Return to
Menu” and press Select to confirm.
Up
Select
Down
RETURN TO MENU
FACTORY DEFAULT
RESTORE?
Up
Select
Down
RETURN TO MENU
RE-SELECT MODEL #
3018R
