DELAY
Delay
BeatZille only has one of the four effects available to Bazille, but it’s probably the most useful one:
A host-synchronized stereo delay with ‘tape wow’ and filtered feedback…
Center / Left / Right
Delay times relative to host tempo, separate for each stereo channel. Precise integer values are
semiquavers (16ths).
Center
defines the overall Feedback time. This is an unusual feature – it means that you can set
a repeat rate without actually hearing that particular ‘tap’. Simply turn
Center Vol
down to zero.
Wow
Emulates slow tape ‘wobble’, ranging from subtle / spacey to ‘almost seasick’.
Volume
Output level controls for the center tap and for the left / right taps (together).
HP / LP
Separate cutoff controls for the highpass and lowpass filters within the feedback path. For the
damping effects typical of tape delays, turn HP up and LP down.
Feedback
The amount of regeneration within the delay circuit. 100.00 will give you an infinite loop if HP is
set to minimum and LP to maximum.
Dry
The level of the unprocessed signal.
41