µ-Dimension SST 1200es, Руководство пользователя

Страница: 51 / 74

Dimension BST 1200es / SST 1200es User Guide
Maintenance 51
2. Check the Teflon shield for:
• Damage - Replace if the area around a cover hole is not
intact or if the shield is torn.
• Material trapped between shield and cover - Replace the
shield if there is evidence of trapped material.
• Security of attachment to metal cover - Replace the shield
if it does not appear to be attached firmly to the cover. The
shield is held in place by an adhesive strip.
Replacing the Teflon Shield
1. Remove the old Teflon shield from the heat shield - remove
excess adhesive and support/modeling material.
2. Remove any excess support/model material around the Heater
assemblies and Toggle Plate Assembly.
3. Remove the protective strip from the adhesive band on the
new teflon shield.
4. Position the new Teflon shield on the inside of the cover.
Center the intersecting cut lines of the teflon shield in the
center of the heat shield holes.
5. Press the new shield in place. Check for good adhesion of
teflon shield to heat shield
Position
intersection
of cut lines in
center of slot
radius
Teflon
washers