µ-Dimension SST 1200es, Руководство пользователя

Страница: 24 / 74

24 Setup
Dimension BST 1200es / SST 1200es User Guide
B. Click the ‘Add from Network...’ button in the lower right
corner of the pop-up.
C. A new pop-up, ‘Add 3D Printer’, should list your printer in
the main window (identified by its UDN). Click on the
printer in this window and enter a Name and Location (your
choice) in the lower portion of the pop-up.
D. Click ‘Add Printer’ - and you are ready to go. Close the 3D
Printer pop-up.
NOTE
If your printer is not displayed in the ‘Add 3D Printer’ pop-up,
you are not using a Dynamic network. You will need to set up
a Static Network address.
If necessary, set the Static Network addresses:
1. Obtain your network addresses from your Network
Administrator.
2. From
Idle
(or
Ready to Build) ,
press
Maintenance
.
The panel displays
Maintenance
and the software version.
3. Press
System
.
4. Press
Set Network
. The top window displays:
Network -
Static IP Address; UDN
5. Press
Static IP
to display current settings. For example:
IP Address: 192.000.000.001
NM Address: 255.255.000.000
GW Address: 198.000.000.001
These are the factory default addresses; they must be
changed for your network.
6. Look for the cursor beneath the first digit of the IP address. The
cursor does not blink. To update the IP address:
Press
Increment
to increase the value one digit at a time.
Press
Next Digit
to move the cursor one place to the
right.