NEO-M8U - Hardware Integration Manual
UBX-15016700 - R07
Document Information
Page 2 of 28
Production Information
Document Information
Title
NEO-M8U
Subtitle
u-blox M8 Untethered Dead Reckoning module including 3D inertial sensors
Document type
Hardware Integration Manual
Document number
UBX-15016700
Revision and date
R07
18-Apr-2019
Document status
Production Information
Product status
Corresponding content status
In Development /
Prototype
Objective Specification
Target values. Revised and supplementary data will be published later.
Engineering Sample
Advance Information
Data based on early testing. Revised and supplementary data will be published later.
Initial Production
Early Production Information
Data from product verification. Revised and supplementary data may be published later.
Mass Production /
End of Life
Production Information
Document contains the final product specification.
European Union regulatory compliance
NEO-M8U compile with all relevant requirements for RED 2014/53/EU. The NEO-M8U Declaration of
Conformity (DoC) is available at
www.u-blox.com
within Support > Product resources > Conformity Declaration.
This document applies to the following products:
Product name
Type number
ROM/FLASH version
PCN reference
NEO-M8U
NEO-M8U-04B-00
FLASH FW 3.01 UDR 1.21
N/A
u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this
document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only
permitted with the express written permission of u-blox.
The information contained herein is provided “as is” and u-blox assumes no liability for its use. No warranty, either express or
implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular
purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent
documents, visit www.u-blox.com.
Copyright © u-blox AG.
