Tzora EasyTravel Classic, Руководство пользователя

Страница: 36 / 44

EasyTravel Classic - ET1-B 36 User Manual Li - Rev. 2019-12 en
Guidance a
nd manufacturer’s declaration – electromagnetic immunity for ME
EQUIPMENT and ME SYSTEM that are not LIFE-SUPPORTING.
Table 3: Guidance and manufacturer’s declaration – electromagnetic immunity
The EasyTravel Lite is intended for use in the electromagnetic environment specified
below. The customer or the user of the EasyTravel Lite should assure that it is used in
such an environment.
Immunity test Compliance level Electromagnetic environment-guidance
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3 3 Vrms
150 kHz to 80MHz
3 V/m
80MHz to 2.5GHz
Portable and mobile RF communications
equipment should be used no closer to any
part of the SYSTEM, including cables, than
the recommended separation distance cal-
culated from the equation applicable to the
frequency of the transmitter.
Recommended separation distance
P
V
d ]
5 . 3
[
1

P
E
d ]
5 . 3
[
1

80MHz to 800MHz
P
E
d ]
7
[
1

800MHz to 2.5GHz
Where
P is the maximum output power rat-
ing of the transmitter in Watt (W) according
to the transmitter manufacturer and
d is
the recommended separation distance in
metres (m).
Field strengths from fixed RF transmitters,
as determined by an electromagnetic site
survey, should be less than the compli-
ance level in each frequency range.
Interference may occur in the vicinity of
equipment marked with the following sym-
bol: