3. Double click TH-9000D shortcut or click
To Com port" in TH-9000D program, install
Double click "TYT TH-9000D", then follow the
57
NOTE: Even in same computer,the selective COM Port is different when USB cable
connects with different USB port.
You shall install software before connecting the USB cable line. Switch on transceiver
before writing frequency.You had better not switch on or off the power supply of transceiver
when it is connected with computer, otherwise, it will make transceiver unable to read or
write frequency. In this case, you have to turn off programming software, pull out USB cable.
then reinsert USB cable and open software, then rechoose COM Port, it will turn into normal
operation. Therefore, please connect transceiver with computer after switching on the
transceiver. Don't restart transceiver power when it is connected with computer.
NOTE: This software has productidentify system, so when firstly installing the software,
you have to connect the products, otherwise you can not start the software.
56
Programming Software Installing and Starting (in windows XP system)
P
3
P
4
P
5
P
1
P
2
DATA
PWR
TX
(As pic 1)
(As pic 3)
installing instruction.
Install USB Cable Driver Programme
1. Click start menu in computer, under "ALL
PROGRAMS" menu, choose and click "USB
"USB To Com port" driver by indication.
2. Connect the optional USB Programming
cable to USB port in PC with transceiver.
(As pic 1)
TH-9000D in procedure index of start menu,
choose serial com port as indicated then click
OK to start programming software. (As pic 2)
4. According to instruction,select correct"COM
Port"(As pic 3),then click "OK" to start
programming software.
(As pic 2)
