24
P
4
P
2
P
2
P
2
P
2
Channel Delete
1. Under channel mode, turn selector knob to select channel which you want to delete.
2. Press
key and key together, current channel will be deleted and emitted
and emitted a prompt voice.
M
icon flashing means current channel is deleted.
Squelch Off
key programmed as Squelch Off to monitor the weak signal.
1. Squelch Off: Press key to disable squelch ,press key again to resume squelch.
Squelch level Setup
Setting the radio to a tight squelch level,you can avoid unwanted signals or noise,but
you may not receive a weak signal. Therefore,it will be better for you to select the normal squelch level.
1. While standby, press
key and turn selector knob at the same time until
LCD appears and current squelch level
2. Turn selector knob or press MIC [ / ] key to set desired squelch level.
3. Press any key except
and key to exit .
Frequency/Channel Scan
Frequency Scan
In frequency (VFO) mode, this function is designed to monitor signal of every communicative
frequency point of transceiver "step size" you have set.
Shortcut Operations
UP
DOWN
25
P
3
UP
DOWN
P
5
UP
DOWN
UP
DOWN
Channel Scan
In channel mode, this function is designed to monitor signal in every channel.
1. In channel mode,Press key for 1s to enter into channel scan
2. Turn selector knob or press Microphone [ / ]
key to change scan direction.
3. Press any key except and key to exit.
CTCSS/DCS Encode and Decode Setup
Repeatedly press key to check whether set CTCSS/DCS encode and decode
in current channel or not.
1. When LCD appears iron, it means current channel with
CTCSS encode, turn selector knob or press Microphone's
[ / ] key to select desired CTCSS encode.
2. When LCD appears and iron, it means current channel
with CTCSS encode and decode, turn selector knob or press
Microphone's [ / ] to select desired CTCSS code.
3. When LCD appears DCS iron, it means current channe can
be set with DCS encode and decode together, turn selector
P
3
UP
DOWN
1. In VFO mode,presst for 1s to enter into frequency scan.
2. Turn selector knob or press Microphone [ / ]
key tochange scan direction.
3. Press any key except and key to exit.
