6.2.7. Select the Command Mode
6.2.8. Set all default
6.2.9. Select the drive ON/OFF setting
COMMAND: M
COMPUTER: EOT SOH
'M'
'Mode'
ETB
ASCII (04H) (01H) (4DH)(30H~38H) (17H)
Byte 1
1
1
1
1
DISPLAY: ACK
(or NACK if failed)
ASCII (06H)
(15H)
Byte 1
1
COMMAND: X
COMPUTER: EOT SOH
'X'
ETB
ASCII (04H) (01H) (58H) (17H)
Byte 1
1
1
1
COMPUTER: ESC
'G'
ASCII (1BH) (47H)
Byte 1
1
Note:
(This command feature is for Y cable printer pass-
through connection only.)
PRINTER ON COMMAND:
PRINTER OFF COMMAND:
COMPUTER: ESC
'S'
ASCII (1BH) (53H)
Byte 1
1
Note: The driver feature mode selections are as
following:
a. PRINTER ON COMMAND (Format as above)
features PRINTER ON and DISPLAY OFF
b. PRINTER OFF COMMAND (Format as above)
features PRINTER OFF and DISPLAY ON
Each ASCII character is transmitted with
1 start bit
8 data bits
1 stop bit
No parity
Note: You may generate your own application software to
run the display according to the standard RS-232C
communication protocols and the SOFTWARE
CONTROL information listed on this chapter.
6.3. Transmission method
-21-
-20-
30H : VFD-450/550
31H : EPSON ESC/POS
32H : UTC/S
33H : UTC/E
34H : AEDEX
35H : ICD 2002
36H : CD 5220
37H : DSP-800
38H : ADM 787/788
Command Modes Selection
