14
6. Appendix
Product Specifications
1.1) Printing Specifications
1) Printing method: 9 pins Impact Dot Matrix
2) Print density: 400 dpi (half dot)
385
dpi
(half
dot)
3) Printing direction: Bidirectional, adjustable by dipswitch
4) Printing width: 42CPL ( 7 x 9 ) / 35CPL ( 9
x 9 )
40CPL ( 7 x 9 ) / 33CPL ( 9
x 9 )
5) Printing speed:
4.5 characters line/sec
6)
Paper
feed
speed:
120
mm/sec
NOTE: There may be variations in printing after switching the mode of the printing speed. To prevent this
for logo printing with ESC command, using a downloaded bit image is recommended. Change in printing speed
does not occur during down loaded bit image printing. Printing speed may be slower depending on the data
transmission speed and the combination of control commands. Low transmission speed may cause intermittent
printing. It is recommended to transmit data to the printer as quickly as possible.
1.2)
Print font
1) ASCII code:
7 x 9 dots, 1.2 (W) x 3.1 (H) mm
9 x 9 dots, 1.6 (W) x 3.1 (H) mm
2) Graphic font:
16 x 16 dots, 2.54 (W) x 2.82 (H) mm
1.3) Mechanical Specification
1) Weight:
1600g
/
1680g (PRP-076D)
2) Dimension:
260 (L) x 155 (W) x 130 (H) mm
1.4) Paper Specification
1) Paper type:
Continuous multipart, original plus carbonless copies
2) Form: Paper roll
3) Paper width: 75 ± 0.5 mm
4) Paper roll size: Roll diameter: Maximum 75 mm
Minimum 12 mm
1.5)
Interface
1) Serial
port:
Dsub 25 pin female connector, 4800,9600,19200 or 38400 bps
baud-rate, none parity, 8 data bits, and 1 stop bit, supports RTS/CTS &
