13
such a problem, paper dust collected in the paper holder and paper transport section and on the surface
of the printer head must be removed periodically. Such cleaning is recommended to be carried out once
six month or one million lines.
Cleaning the Paper Holder
Use a soft cloth to remove paper dust from the paper holder and paper transport section.
5.3) Preventing Paper Jams
The paper should not be touched during printing. Shift the paper during paper ejection may cause a
feed failure or paper jam.
5.4) Fixing Paper Jam
The Status LED (Red) on the printer control panel will flash with beeps if paper is jammed.
Please follow the below instruction to remove paper jam.
(a) Switch the printer power off.
(b) Open the printer cover.
(c)
If the printer cover opens, removed the jammed paper gently (
take care not to touch the
printer head.)
And reinstall the paper roll.
Caution:
Since working on the cutter may be dangerous, be sure to turn off the printer first.
Note:
Do not apply
extreme
force to open the front cover to prevent damages to the cutter. If the
front cover will not open properly, please contact your dealer.
(d)
Return the cutter to its home-position and release or clean out the jammed paper in inside
the front cover. Open the top cover, and then reinstall paper roll.
