Tysso BCP-5500 Series, Руководство пользователя

Страница: 12 / 60

-10-
Cable
USB Power Cable
Host PC
Charge the battery
via RS-232 Interface and USB Power Cable
1. Turn off the computer.
2. Connect the D-type 9-pin RS-232 connector to the PC.
3. Connect the USB Power Cable to the rear DC Jack of the RS-232
connector and HOST PC.
4. Install the data collector to the recharge and communication cradle.
The data collector is activated and the battery is recharging
automatically (There is a beep sound and the LED indicator lit RED
steadily).
5. As the battery is fully charged, the LED indicator lit GREEN to indicate
the battery charge is completed.
6. Remove the data collector from the cradle.
The data collector is ready to use.
Warning:

Use only the supplied cable to charge the battery.

DO NOT dissemble or modify the data collector and the pre-installed
rechargeable battery. It should cause damage to the product and the
injury to the people near the product.
3.1.3 Charge the battery via RS-232 Cable and Optional Power