■ Note
: Always use the Glucode Chip to ensure your EZ Smart-608
Meter is
performing properly.
■ DO NOT
misplace your Glucode Chip.
The EZ Smart-608
Meter uses one 3-Volt lithium battery (CR-2032).
When to Replace
the
Battery
When the battery is low, the Meter will show a warning sig-
nal. When this display appears, it is time to replace a new
battery. When the low battery warning signal is shown, the
EZ smart-608 Meter will provide accurate results for ap-
proximately 50 more measurements.
How to Replace
the Battery
1.
From the back of the Meter, gently slide and remove the
battery cover.
2.
Insert a 3-Volt lithium battery (CR-2032) with the “+” side
facing up.
3.
Slide battery cover back into place.
Installing/Replacing the battery
12
