TYROLIT Hydrostress WSE2226, Руководство по эксплуатации

Страница: 3 / 23

TYROLIT Hydrostress AG
Page 3
Safety
DANGER
Failure to comply with the safety instructions in the «Safety Manuals / System Manuals» may re-
sult in serious injuries or even death.
X
Make sure that the «Safety Manuals / System Descriptions» for the relevant type of saw have
been fully read and understood.
DANGER
Death or serious injury can be caused by sudden start-up of the machine.
X
Before switching on the system, ensure that no other persons are present in the danger ar-
eas.
X
Switch the system off before connecting or disconnecting cables.
X
On leaving the system switch off and make safe so that it cannot be switched on again.
Death or serious injury as a result of the sawing machine continuing to run after an acci-
dent.
X
Ensure that the EMERGENCY STOP button can be reached quickly.
Electric shock from live cables and connectors.
X
Switch off the control unit WSE2226

before connecting or disconnecting cables.
X
Ensure that the power supply is earthed and fitted with a residual current operated protec-
tive device (FI Type B) with a maximum residual current of 30mA.
Risk of fire due to incorrect mains voltage.
X
Make sure that the mains voltage and mains frequency correspond with the mains settings
of control unit WSE2226

.
Action in an emergency
X
Press the EMERGENCY STOP button on the remote controller.
If the EMERGENCY STOP has been activated on the radio remote controller, the LED pilot lamp
flashes quickly.
In an emergency the sawing machine can be also switched off using the main switch of control
unit WSE2226

.
Emergency Stop
1
1.1