13
3.5
Test direction of rotation of the saw blade
- Press the switch start (15).
- Switch the Star-delta-switch (item 12) short to "Star''.
- Check the direction of rotation of the saw blade.
*
The direction of rotation is clockwise, seen from the left (direction arrow on the saw hood)
.
3.6
Change direction of rotation
- Turn off main switch (item 12).
- Remove power cord from the socket (item 11).
- Change phase of the power supply plug (item 11) with a screwdriver
.
3.7
Test run
- Place block on table.
- Press the switch start (15)
- Push the block to the stop.
- Press the main switch (item 12) to "Star".
- Wait until the motor has a regular revolution (regular sound)
- Turn the switch (item 12) further to "triangle"
ATTENTION! ls the saw blade adequately supplied with cooling water?
Caution!
- Dry cutting is not permitted.
- lnadequate cooling water results an early wear or malfunctioning of the saw blade.
- Start feed movement via handle (item 13) on the saw table.
*
First cut with low feed speed.
*
Adjust feed speed to the feed force.
4. Transport
4.1
Preparation for transport
- Remove the power cord from the saw.
- Empty the water from the tub.
- Saw blade height adjustment (item 7) is tightened.
- Lock the device on the saw table
4.2
Displace with the crane
- Hang up the suspension gear with sufficient carrying force into the eyelets provided for
this purpose at the suspension point (Pos.16).
- By displacing-keep the saw in youre By
4.3
Transport with the truck
- fix the saw on the suspensions point (Pos.16)
