TYROLIT Hydrostress FSE1240, Руководство по эксплуатации

Страница: 18 / 24

TYROLIT Hydrostress AG
7 Maintenance
When? What?
Daily
►
Perform a visual check for damage.
Weekly
►
Check belt and chain tension and adjust as
necessary.
Every 50 hours of operation
►
Lubricate grease nipples.
Annually or every 100 operating hours
►
Arrange a major service by TYROLIT
Hydrostress AG or an authorised
representative.
7.1 Grease nipples
Position of grease nipples
1 Motor: 2 items
2 Feed adjuster control rods: 4 items
3 Wheel drive shaft bearing: 2 items
4 Cylinder eye: 1 item
5 Blade drive shaft bearing: 2 items
7.2 Tensioning belt on travel drive
►
Remove the appropriate number of belt links until the belt is tensioned.
Page 18 Floor Saw FSE1240
