Network
You need an internet connection to process a transaction,
ideally WiFi, although a 3G/4G SIM is included in the machine as
a backup connection method. Follow the below steps to connect
to the internet.
1 . Turn on the EFTPOS machine by pressing the red ‘STOP’ button
2 . If you see ‘Network Setup’ then you will need to connect to
the internet. Select WiFi and enter your WiFi password
3 . If you are prompted to choose DHCP or Static, select DHCP
unless you have specific network requirements
4. If you see ‘Sign on failed’, make sure your internet is
connected and that you have entered the WiFi password
correctly. Remember passwords are case sensitive
EFTPOS machine
1 . Once connected to the internet you should see
‘Tyro Terminal set up’
2 . Press ‘Next’
3 . Choose/enter your new Admin Password – this needs to be four
numbers, no sequences (eg. 1234) or repetitions (eg 4444) are
accepted. For more information on passwords see next page
4 . This will give you access to the Configuration menu where you
can enable the following features, if your business is eligible for
them (for more information on EFTPOS features see page 14):
• Refunds - you will be asked to set a password*, this will be
required each time you enter a refund amount
• MOTO
• Cash out
• Pre-authorisations
• Pair with POS: Select ‘Skip’ if you will be manually
processing all payments on your EFTPOS machine.
Select ‘Start’ if you have a POS that you integrate with
• Tipping: You will also be able to enable tipping on the
machine where you will be asked to set a password*,
this is used to access the tipping report
*Can be the same as the Admin password, or you can make it different
for added security.
Getting set up
7
6
Tyro Mobile EFTPOS machine user guide
Getting set up
