1
Button Displays and operating instructions
1.1
Key Description
Name
key
Indicate
Icons
Start /End
Back-Tacking
Selection
Execution starting back seam B segment or execution starting back seam (A, B
segment) 1Execution starting back seam (A, B segment) 2 times
Execution terminates back seam C segment or execution terminates back seam
(C, D segment) 1 Execution terminates back seam (C, D segment) 2 times
Freedom
sewing
shortcuts
As the treadle is toed down, machine will start sewing. Once the treadle returns
to neutral, machine will stop immediately. As the treadle is heeled back,
machine will automatically start trimming cycle.
Continuous
back seam
shortcuts
Once the treadle is toed down, all the seams of Bar-Tacking will be completed
with D times, and then the thread will automatically be trimmed. Note: When
the Bar-Tacking Sewing starts, will not stop until the trimming cycle finished,
except for the treadle heeled back to cancel the action.
Some fixed
stitch shortcuts
As the treadle is toed down, Constant-Stitch Sewing E, F, G or H performs
section by section. Once the treadle returns to neutral intermediately in any
section, machine will stop immediately. When the treadle is toed down again,
the balance stitches of E, F, G or H goes on. The key adjustable four,
seven-segment, eight, and other multi-sew sewing patterns. When the display
P1 ~ PF press [S] key to confirm the changes multistage sewing patterns P1 ~
PF is appropriate to modify the number of segment, the latter two is to modify
the segment pin number
。
Multi-set stitch
shortcuts
Enter and
determine \
save button
Enter parameter values
such items and their contents change after
adjustment, need to press the [S] key to save the confirmation. Note: The
parameters are saved directly by the [S] key.
Mention
needles / fill
needle key
Continuous back seam except, any kind of sewing stop, click for lifting the
needle or forward fill half needle. Any kind of sewn termination is
not tangent, click for lifting the needle or forward fill half needle.
Automatically
trigger button
1
．
In Free sewing: One touch of this key makes beep sound without any
function also LED does not light up.
2
．
In Constant-Stitch Sewing: One shot to the pedal, stitches number of E, F, G
or H will be automatically performed. Toe down the pedal again and again to
finish the rest sections until it finish pattern.
Tangent line
function keys
1
．
Set or cancel the use of the tangent function.
2
．
The corresponding icon is not lit, turn off the corresponding functions.
Function key
enter parameter
area
Under normal mode, press the [P] key to enter the user parameter mode
Press and hold the [P] key to boot into parameter mode Technician
Set value
increment /
parameter
increment key
1
．
A
、
B
、
C
、
D
、
E
、
F
、
G
、
H section, increase the number of setting stitch .
2
．
Increase the parameter in Parameter selection.
3
．
Increase the setting value in Parameter value.
Set value
decrement /
decrement key
parameters
1
．
A
、
B
、
C
、
D
、
E
、
F
、
G
、
H decrease the number of setting stitch
2
．
Decrease the parameter in Parameter selection.
3
．
Decrease the setting value in Parameter value.
Needle stop up
and down keys
1
．
LED ON indicate stopping machine at the upper stop needle position.
2
．
LED ON indicate stopping machine at the lower stop needle position.
Presser foot
shortcuts
1
．
LED ON=Presser Foot automatically goes up after trimming.
2
．
LED ON=Presser Foot automatically goes up after motor stops.
3
．
Two icons are both LED ON= Presser Foot automatically goes up after