TYM T603 Скачать руководство пользователя

Страница: 5 / 121

Perkins is

not

responsible for resultant damage to an emission related part or component resulting from:

• Any application or installation Perkins deem improper.

• Attachments, accessory items or parts not sold nor approved by Perkins.

• Improper engine maintenance, repair or abuse.

• Owners unreasonable delay in making the product available after being notified of a potential

product problem.

This warranty is in addition to Perkins standard warranty applicable to the engine product involved

Remedies under this warranty are expressly limited to the provision of material and services as specified

herein Perkins will not be responsible for any incidental, indirect or consequential loss, damage, expense or

cost (including but not limited to loss of profits, contracts or production) of any nature howsoever arising

out of or in connection with this warranty.

Содержание T603


























































































































Результаты поиска

Содержание T603

Отзывы:

Похожие инструкции для T603

Бренды по названию

Популярные бренды

TYM T603, Руководство оператора

Результаты поиска

Содержание T603

Отзывы:

Похожие инструкции для T603

Бренды по названию

Популярные бренды