TYM T353 Скачать руководство пользователя страница 38

Страница: 38 / 92

►

DRIVER’S SEAT

►

FRONT WHEEL DRIVE LEVER (4WD)

The Differential Lock Pedal is located below the

LHS of the Operator.

In the ON position the front wheels are engaged and

in the OFF position they are disengaged.

Engage & disengage the front wheel drive with the

front wheels in the straight position and at low

Engine RPM.

important

Do not use front wheel drive at
high speed or on the road as
premature wear of components
will result.

important

Always use the clutch when
using the front wheel drive
lever.

Use of front wheel drive improves traction performance.

►

DRIVER’S SEAT

To adjust the seat backwards and forwards lift the lever at

the front of the seat and set it to the desired position

(Please refer to page 11 of how to adjust the seat)

■

Seat Belt

-Release the Seat Belt

Press button C and Pull the Male Fitting A from the Buckle B.

-Adjusting the Seat Belt

Make Sure the belt is across your hip and not over your stomach.

To adjust the male fitting A :

1. Pull toggle D down the strap by the required distance.

a. To make the strap longer, pull end E as far as it will go.

b. To make the strap shorter, pull end F as far as it will go.

Содержание T353





























































































Результаты поиска

Содержание T353

Отзывы:

Похожие инструкции для T353

Бренды по названию

Популярные бренды

TYM T353, Руководство оператора

Результаты поиска

Содержание T353

Отзывы:

Похожие инструкции для T353

Бренды по названию

Популярные бренды