TYM T353 Скачать руководство пользователя страница 10

Страница: 10 / 92

►

DAMAGE OF THE ROPS

If the tractor has rolled over or the ROPS has damaged (such as striking an overhead object during

transport), It must be replaced to provide the original protection. After an accident, check for damages

to the 1.ROPS.2.Seat 3.seat belt & seat mountings. Before you operate a Tractor, replace all damaged

parts.

►

DO NOT WELD, DRILL OR STRAIGHTEN THE ROPS

Never attach chains, ropes to the ROPS for pulling purposes; this will cause the

Tractor to tip backwards. Always pull from the Tractor drawbar. Be careful

when driving through door opening or under low overhead objects. Make sure

there is sufficient overhead clearance for the ROPS fatal injuries

If the ROPS is removed or replaced, make certain that the proper hardware is

used to replace the ROPS and the recommended torque values are applied to

the attaching bolts

Always wear your seat belt if the tractor is equipped with ROPS

Warning

Содержание T353





























































































Результаты поиска

Содержание T353

Отзывы:

Похожие инструкции для T353

Бренды по названию

Популярные бренды

TYM T353, Руководство оператора

Результаты поиска

Содержание T353

Отзывы:

Похожие инструкции для T353

Бренды по названию

Популярные бренды