TYM T353 Скачать руководство пользователя страница 36

Страница: 36 / 92

►

BRAKE PEDAL

Right and left brake pedals are provided to assist in turning the tractor in the field.

Caution

A connecting latch is provided to connect the right and left brake pedals for high

speed or road use.

In the interest of safety always use it on the road or at high speed as using one side

only can cause rollovers.

When servicing the tractor ensure that the adjustment on both sides in the same.

►

CLUTCH CUT-OFF ARM

For long term storage of the Tractor it is possible

to latch the clutch in the disengaged position.

Push the clutch down and engage the latch to

hold it there.

Do not attempt to start engine when this arm is being used.

warning

►

ACCELERATION PEDAL

This pedal can override a fixed hand throttle setting

►

PARKING BRAKE LEVER

Connect the brake pedals , push them down while

pulling the park brake up to engage. Press the parking

brake pedal and push the Brake pedal to release.

Traveling with the

parking brake

on will damage the brakes.

important

►

PARKING BRAKE (HANDLE TYPE) – IF EQUIPED

1. Lift brake handle up to set the park brake.

2. Lift park brake handle slightly until park brake release

button can be depressed. Hold button in and lower park

brake handle all the way down to release the park brake.

Содержание T353





























































































Результаты поиска

Содержание T353

Отзывы:

Бренды по названию

Популярные бренды

TYM T353, Руководство оператора

Результаты поиска

Содержание T353

Отзывы:

Бренды по названию

Популярные бренды