TYM T264, Руководство по ремонту

Страница: 48 / 215

Testing Pressure 1.5Kgf/ /
㎠
2) Inspection for radiator clogging
To inspect the radiator cores to see if they are
clogged with fur or rust,remove the radiator cap and
check for transparency of the coolant,and for rust or
fur formation around the radiator throat inside the
radiator.
If some rust or fur has formed or the coolant
transparency is very poor,the radiator should be
cleaned.
a. Cleaning the radiator inside.
-Place the radiator upside down and supply
pressurized water from a faucet to the lower tank,
draining through the upper tank,as shown in the
figure to wash out accumulated deposits.
-Clean with a detergent
When cleaning the radiator with a detergent,
follow the instructions given by its manufacturer.
Different detergents have different characteristics.
b. Cleaning the radiator exterior
-
Cleaning the net (wire mesh)
After the tractor has been operated in dusty
conditions,check the net daily and clean it if
necessary.
-
Cleaning the radiator cores
Clean the radiator cores by applying water spray
or compressed air so as to for a right angle with
the radiator cores,moving water application in
parallel.
Note:
When cleaning the radiator cores with pressurized
water,be sure to apply it at a right angle to the
cores. Slanted application might deform their
cooling fins.
3) Visual inspection of the exterior parts
When the radiator exterior is corroded,cracked,or
badly damaged,replace the radiator.Also replace
damaged or fatigued water hoses.
Retighten loose hose clamps securely if water is
leaking through the hose clamps securely ,or
replace them if necessary.
4) Inspection of the radiator cap.
Check the radiator cap to see if it functions
normally,using a radiator cap tester as following.
FIG.3-6
FIG.3-7
FIG.3-5
3-4