42
43
Turbo Function
Cleaning Function
Cleaning Function
TURBO Function
LEANING Function
C
1
If the screen is touched, it changes to the previously used screen.
2
When functional water is selected on standby mode, it goes into auto-
matic cleaning for 15 seconds, and the selected functional water will
be dispensed.
1
Press the top left corner of the screen. The menu options will fall below
the upper part of the screen.
2
Press the CLEANING icon.
3
Cleaning mode stops after 15 seconds and the screen changes to the
home screen.
Cleaning can take place automatically and/or manually.
Auto Cleaning (15 Seconds). Auto cleaning can be set to happen after
a set amount of water, 20L or 30L or every 24 hours at a time of your
choosing. For more information, see Cleaning Mode Settings on Page
38.
Auto Cleaning
15:00
Manual Cleaning
Manual Cleaning (15 seconds) is performed whenever desired by
simply touching the icon.
URBO Function
T
The TURBO function allows you to create strong alkaline and acidic water. These types
of water are
ONLY
to be used for cleaning, sanitizing and disinfecting purposes. The
minimum and maximum pH of turbo will vary depending on the quality of your
source water.
Caution
TURBO
Strong Acidic Water
pH 2.5
~ pH 3.8
Used to disinfect
and sterilize
TURBO
Strong Alkaline Water
pH 10.0
~ pH 11.8
To remove stains from
fabrics/carpet/upholstery
Alkaline Turbo Water Outflow
Acidic Turbo Water Outflow
The waters produced in
TURBO
mode are not intended for drinking.
DO NOT DRINK
these types of waters.
DO NOT USE
the
TURBO
function in a manner other than directed.