manualshive.com logo in svg

Tyent ACE-13, Руководство пользователя, Страница: 11 / 24

Поделиться
Скачать
Tyent ACE-13 Скачать руководство пользователя страница 11

Customer Serviceable Parts

How to Change the Filters

20

21

How to Change the Filters

Customer Serviceable Parts

ustomer Serviceable Parts

C

Primary Filter: 

 YT20 1st Filter

1st Filter

2nd Filter

ATTENTION:

 The consumer accepts any and all responsibility and/or liability if 

replacement filters and/or purchased parts are not manufacturer specific. This unit 
contains high-performance purifying filters and an advanced control system.

The life of the filter can vary greatly due to use, water pressure, water quality and the 
changing of the seasons. Filters may need to be replaced sooner than the scheduled 
time due to these reasons, you may notice reduced water quality or declining water taste.

Recommended filter replacement cycle:

(Every 6 months)

Removes harmful chemicals like chlorine, 
compounds such as agrichemicals and deter-
gents, large suspended matters like rust and 
sediments as well as other volatile organic 
compounds through an efficient activated 
absorption method. It also eliminates bad 
smells and any remaining dissolved chlorine.

Secondary Filter: 

 YT20 2nd Filter

Recommended filter replacement cycle:

(Every 6 months)

0.01 micrometer filtering film filters 
contaminated materials including ordinary 
bacteria, etc. and maintains the minerals 
in the water.

ow to Change the Filters

H

Close

Open

1. Shut off the water supply to the unit and 

unplug the power cord. Open the door in 
front of the product.

2.

3.

4.

5.

Remove old filter:
(a) Lift the filter that needs to be replaced.
(b) Turn the filter counterclockwise until it loosens.
(c) Pull the filter down and remove it. 

Put the new filter into the right position 
by turning it clockwise.

When installing the filter, the connection 
bump of the head and the connection 
groove on the top of the filter should be 
completely combined.

Close the door, plug the power cord 
back in and reengage the water supply.

After initializing the filter, press the H

2

O button and run purified water for 3 minutes.

It is highly recommended that you follow this process in order to ensure that your

machine functions properly.

ⓐ

ⓑ

ⓒ

Содержание ACE-13

























Отзывы:

Нет отзывов