Tycon Power Systems Wireless EZ-Bridge AC, Руководство пользователя

Страница: 9 / 20

9
have the same power setting.
TECH TIP: You may want to play around with different power set-
tings to see what works best for your particular link.
7. FACTORY DEFAULTS : If at any time the system stops working be-
cause of changes made to the settings, you can get back to the original
settings by resetting to factory defaults. Go to BACKUP/FLASH FIRM-
WARE | PERFORM RESET. You will need to reset both sides of the
link in this way. Always reset the remote unit first and the local unit sec-
ond. Any customized settings will be lost once this process is initiated.
MANUAL RESET: If you cannot access the control panel on the unit
you can do a manual reset. Remove bottom cover of unit. Power up the
unit, wait 2 - 3 mins or until you hear two beeps, then press and hold the
black reset button for 15 seconds, release and wait 2 - 3 mins for reboot.
Power cycle the unit which refreshes the DHCP and wait 2 - 3 mins.
RESTART: A single (1) second press of the reset button will restart the
unit without changing any defaults. This action will also refresh the
DHCP.
8. FIRMWARE UPGRADE : For the latest firmware point your browser
to https://support.tyconsystems.com. Download the latest firmware to
your PC. Go to BACKUP/FLASH FIRMWARE | FLASH NEW FIRM-
WARE | CHOOSE FILE and then browse for the new file, then click
FLASH IMAGE. The update process takes about 4 minutes. You will
hear 1 beep when the unit reboots and two beeps when the unit is
ready.
9. CHANGING OPERATING MODE : The EZ - Bridge
®
can be changed
to an Access Point or Client (Station) device on the WIFI | EDIT | IN-
TERFACE CONFIGURATION | MODE page. Y ou might change units to
station if you wanted to have multiple units communicating with a single
access point. We recommend using Access Point (WDS) and Station
(WDS) to maintain the highest level of network transparency.
TECH CORNER
Additional Information you may find useful
1. ADDING A SECOND ROUTER — Don ’ t attempt to add a second
router to your network until you first have a working EZ - Bridge
®
link and
you are familiar with the operation. We have a white paper which may
help you to install the second router here: http://tyconsystems.com/
documentation/WhitePapers
2. RAIN, SNOW, ICE – The frequencies being used by the EZ - Bridge
®