Tycon Power Systems Wireless EZ-Bridge AC, Руководство пользователя, Страница: 7 / 20

7
ture built into the housing back fin. The Ethernet spec allows for a maxi-
mum cable length of 100 meters or about 328 feet.
STEP 10: Connect the device needing network connectivity to the LAN
port of Side B ’ s PoE inserter.
Advanced Features
Since documentation for the advanced features is too extensive to cov-
er here please visit our online wiki at https://tyconsystems.com/
support?view=kb&kbartid=25
FAQs : https://faq.tyconsystems.com
Knowledge Base : https://tyconsystems.com/index.php/support?
view=kb
Software Settings
We strongly recommend that you create a working plug
and play link before making ANY changes to the soft-
ware settings
1. There is an HTML management system (control panel) built into eve-
ry EZ - Bridge
®
unit which is accessed thru a standard web browser. The
unit can communicate thru the CAT5/6 Ethernet cable connection or
with an established link, through the wireless bridge connection, so you
can manage remote units from a single location.
NOTE: The device will usually go into a 2 - 3 minute reboot cycle when
clicking on SAVE & APPLY CHANGES. During this time it will be unre-
sponsive. The unit will beep once when it reboots and beep twice when
it is ready.
2. IP ADDRESS: Default fallback IP addresses for the EZ - Bridge
®
are
192.168.1.139 and 192.168.1.239. To access the EZ - Bridge
®
control
panel, your computer IP address must be on the same subnet ie;
192.168.1.xxx. The EZ - Bridge
®
ships with DHCP client enabled so if the
unit has access to your network it will get its IP address automatically
from your network. To find the units IP address use the Discovery Tool
which is available at https://support.tyconsystems.com. We recommend
after everything is working to your satisfaction that you assign a unique
static IP to each unit so you always know how to access the units on
your network. The IP address setting can be changed at INTERFACES
| LAN | EDIT
TECH TIP : We recommend always making changes to the remote
unit first and the local unit second. The EZ Bridges are shipped with
the two antennas paired up. No additional changes on the settings is