11
7.
DEVICE CONNECTIONS and FEATURES:
TROUBLESHOOTING
1.
Link Down
If a link goes down the first thing to do is run the discov-
ery tool from both sides of the network. The discovery tool should be
able to discover both units from each side of the link. If it can see the
local unit but not the remote unit then the wireless link is down or the
remote unit is down. Run the discovery tool on the remote side. If it can
see the remote unit then the wireless link is down. Reset both units to
factory defaults and power cycle them. If it cannot see the remote unit
from the remote side, bring the power supply and POE Inserter cable
from the working side and see if that fixes the problem. Also check your
cables.
2.
Poor Performance
If you are seeing poor performance, power cycle
both units then after about 10 minutes check the signal strength on the
status page of the web based control panel. If signal strength is be-
tween –
76
and –
90
dBm the signal level is abnormally low and could be
because the antennas have lost their physical alignment. Check the
alignment. Antennas are more sensitive to vertical tilt than horizontal.
Содержание Wireless EZ-Bridge AC
Страница 17: ...17 Notes ...
Страница 20: ...20 8000081 Rev1 EZ Bridge AC Qwik Install Guide ...