Tyco D-307871, Быстрый старт

Страница: 3 / 64

KP-241 PowerG wireless portable keypad
3
D-307871 KP-241 PG2 Quick Start Guide
Quick reference guide
Table 2. Quick reference guide
Feature Description Command
Arm Home
Arms the system to protect the site perimeter. Movement within the interior does not
trigger an alarm. Press the Arm Home button and enter your user code or
present your tag.
Arm Away Arms the system when you vacate the protected site.
Press the Arm Away button and enter your user code or
present your tag.
Quick Arm Home
Arms the system without the need to provide a user code.
Note: Enable Quick Arm on the control panel to use this function.
Press and hold the Arm Home button for two seconds.
Quick Arm Away
Arms the system without the need to provide a user code.
Note: Enable Quick Arm on the control panel to use this function.
Press and hold the Arm Away button for two seconds.
Latchkey Arm
Arms away and enables an automatic latchkey message to one or more designated
phone numbers, or to the user app, when a latchkey user disarms the system. For
example, parents can use this feature to receive a notification when a child has returned
home and disarmed the system. You can assign latchkey users to users 5 to 8.
Press the Arm Away button three times.
Instant Arm
Use this feature to skip the entry delay time period after you arm the system.
A detection in any zone will trigger an immediate alarm.
Press the Arm Home or Arm Away button, enter your user
code or present your tag, and then press the Arm Instant
button.
Disarm Restores the system to the standby state.
Press the Disarm button and enter your user code or
present your tag.
Disarming under
duress Initiates a silent alarm if you need to disarm the system under duress.
The system disarms normally, but a silent alarm transmits to the monitoring station. Press the Disarm button and enter the duress code. The
default duress code is 2580.
Emergency alarm Initiates an emergency alarm. Press and hold the Emergency button for two seconds.
Fire alarm Initiates a fire alarm. Press and hold the Fire button for two seconds.
Panic alarm Initiates a panic alarm.
Press and hold both the Emergency and Fire buttons for
two seconds.
Partitions
Use the partition feature to arm and disarm up to three controllable areas.
Note: Enable partitioning on the control panel to use this feature. Press Partition buttons 1, 2 or 3 to select a partition before
arming or disarming the system.
Function button Activates the function set by the installer. Press the Function button.