Tyco CIM800, Руководство по установке

Страница: 3 / 8

Mounting MZX CIM800
Installation Instructions Doc. version 4.0 3/8
3 Connect the chassis plate earth lead to the hous-
ing, see Fig. 2.
Installation to M520 double gang
cover
How to install MX800 modules to an
M520 double gang cover
1 Assemble the CIM800 to the M520 Double Gang
cover, using the four screws and washers pro-
vided,
2 Fit cover onto MK backbox.
3
If an IP22 rating is required additional sealing
must be applied. Apply Loctite S1595
silicone
sealant around the LED, as shown in Fig. 5.
Note how the sealant fills the small gap
between the LED and its hole in the cover.
Fig. 2: A
NC-8 - Chassis Plate
1 – Chassis plate fixing screw
2 – Chassis plate
3 – Cover earth
4 – Chassis plate earth
5 – Transit screw
6 – Typical positions of 800 modules (4 per row)
CAUTION
Ensure only nylon stand-offs and
washers are used.
1
2
3 4
5
6
Fig. 3: ANC-8 - PCB Fixing Detail
1 – Housing
2 – Plate
3 – Nylon spacer
4 – Ancillary PCB.
5 – Plain washer
6 – Nylon nut
Fig. 4: CIM800 Fitted to Cover
2
3
4
5
6
1
TB1
TB2
A+ A- B+ B- L+ L- L+ L-
PROGRAMMING
PORT