manualshive.com logo in svg

Tyco AutoPulse Z-10, Инструкции по установке, программированию и эксплуатации


Поделиться
Скачать
background image

 

 

Overview, 

Continued

 

 

The first programming step is to select the application mode (i.e., Agent Release, Single Hazard, 
Cross Zoned, Combined Release, etc.).  The AutoPulse Z-10 can be programmed with any one of 
13 agent release or Preaction/Deluge application modes.   

Note:

  Refer to Table 1-2 in Chapter 1 for a summary of each application mode.  

 

Method Description

Text-Based 

Programming

 

The first prompt, shown below, queries you to select the application mode. 

[01] APPLICATION MODE: 
d*1 = Agent Release, Single Hazard, Cross Zoned, Combined Release 
2 = Agent Release, Single Hazard, Non-Cross Zoned, Combined Release 
3 = Agent Release, Dual Hazard, Cross Zoned 
4 = Agent Release, Dual Hazard, Non-Cross Zoned 
5 = Preaction/Deluge, Single Hazard, Cross Zoned, Combined Release 
6 = Preaction/Deluge, Single Hazard, Non-Cross Zoned, Combined Release 
7 = Preaction/Deluge, Dual Hazard, Cross Zoned 
8 = Preaction/Deluge, Dual Hazard, Non-Cross Zoned 
9 = Agent Release, Single Hazard, Cross-Zoned, NYC abort 
10 = Agent Release and Preaction/Deluge, Single Hazard, Cross-Zoned, Combined 
Release 
11 = Agent Release and Preaction/Deluge, Single Hazard, Combined Release 
12 = Agent Release, Single Hazard, Cross-Zoned, Bell/Horn/Strobe 
13 = Agent Release, Single Hazard, Bell/Horn/Strobe 
 
(d=default, *=current setting) 
 
Select Number(X=exit): 

 

 

Enter the number corresponding to the application mode you want to select and press the carriage return.  Refer 
to “Programming the Relay Option” in the next section for a description of the next programming step.  

 

Front Panel 

Programming

 

The top LED (red) on the left side of the display is lit to indicate the application mode is being programmed. The 
top LED on the right side of the display is lit to indicate the default application (Agent Release, 1 Hazard, Cross 
Zoned, Combined RAC) that is currently selected.   
 
Press ACK to use the default.  To choose a different application, do the following: 
 
1. 

Press the RESET key to move down through the list of available applications.  Each time you press this 
key, the illuminated LED on the right side of the panel changes to the next one down. If none of the first 
nine applications are selected, the second application mode menu will appear. It is shown on the next 
page. (Refer to the figure below for the relationship between the LEDs and applications.) 

2. 

When the LED corresponding to the desired application is illuminated, press the ACK key.  This saves the 
selection in memory and moves you to the next programming step. 

 

 

Programming the Application Mode 

Overview 

When top LED (red) on left 
side of display is lit, it 
indicates that the 
application mode is being 
programmed. 

These LEDs represent the 
available application 
selections.  Use the 
RESET key to move 
through the choices.   
 
Press ACK when the 
illuminated LED 
corresponds to the 
desired choice. 

Yellow Trouble LED lit to 
indicate panel is in 
programming mode.  
Green LED is AC Power. 

Содержание AutoPulse Z-10


























































































Отзывы:

Нет отзывов

Похожие инструкции для AutoPulse Z-10

Quickmill E61 Assembling Instructions preview
E61
Бренд: Quickmill Страницы: 3
B&R Industries AP1000 User Manual preview
AP1000
Бренд: B&R Industries Страницы: 89
DayTronic 3700 Series Instruction Manual preview
3700 Series
Бренд: DayTronic Страницы: 22
DayTronic System 10 User Manual Book preview
System 10
Бренд: DayTronic Страницы: 414
Farfisa TD6100 Manual preview
TD6100
Бренд: Farfisa Страницы: 20
Racal Instruments 1266 Manual preview
1266
Бренд: Racal Instruments Страницы: 64
Warren Controls E024 Installation, Operation And Maintenance Instructions preview
E024
Бренд: Warren Controls Страницы: 28
EAS Electric ECRP86EKD Operating Manual preview
ECRP86EKD
Бренд: EAS Electric Страницы: 89
Febco 856 Maintenance Manual preview
856
Бренд: Febco Страницы: 12
HANYOUNG NUX NP100 Manual preview
NP100
Бренд: HANYOUNG NUX Страницы: 36
HANYOUNG NUX HY Series Instruction Manual preview
HY Series
Бренд: HANYOUNG NUX Страницы: 4
MADRIX Nebula User Manual preview
Nebula
Бренд: MADRIX Страницы: 91
MADRIX Nebula Quick Start Manual & Technical Manual preview
Nebula
Бренд: MADRIX Страницы: 36
MADRIX Nebula Quick Start Manual preview
Nebula
Бренд: MADRIX Страницы: 40
YASKAWA MP Series Driver Manual preview
MP Series
Бренд: YASKAWA Страницы: 18
Rachio IRO Installation Manual preview
IRO
Бренд: Rachio Страницы: 2
NAPCO MFA6000 Operating & Installation Instructions Manual preview
MFA6000
Бренд: NAPCO Страницы: 48
NAPCO Magnum Alert 2600 Operating & Installation Instructions Manual preview
Magnum Alert 2600
Бренд: NAPCO Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды