Illustra Flex 3MP Outdoor Bullet Quick Start Guide
5
8200-1456-03 D0
Procedure 1 Mounting the camera
Step Action
1
Affix the mounting template to the surface. After you drill the holes, knock in 4 plastic
anchors and then lock in the 4 self-tapping screws to fasten the camera to the surface.
Figure 8 Mounting the Bullet camera to a ceiling
2
Mount the unit onto the ceiling and fasten it securely as seen in Figure 8 on page 5, or if
mounting onto a wall refer to Figure 9 on page 5.
Figure 9 Mounting the Bullet camera to a wall
WARNING
Depending on the material of mounting surface, different screws and anchors than those supplied
with the product may be required. To prevent the unit from falling off the surface, ensure that it is
mounted to a firm location (ceiling slab or channel) using a safety wire strong enough to withstand
the total weight of the unit. Be aware of the finishing at the end of the wire.
CAUTION
Safety wire must be connected with one end the wall or ceiling and the other to the safety-cord
screw of the unit. By cabling so, it is possible to prevent the unit from accidental falling in a sudden
at any time.
- End -
All manuals and user guides at all-guides.com
