Illustra Flex 3MP Outdoor Bullet Quick Start Guide
8200-1456-03 D0
6
Procedure 2 Connecting the wires
Step Action
1
Attach the camera to the fixed surface.
2
Pass all the signal cables through the mounting bracket.
3
Connect the power cable to the power plugs with one of the following options:
a
AC 24V: Connect 24V (~) cables to terminals ~AC 24V.
b
PoE: Connect the RJ-45 jack to a PoE compatible network device that supplies power
through the Ethernet cable.
4
Insert audio cable and alarm cable to the unit. Connect the network cable to the RJ-45
terminal of a switch. Refer to Input/Output connector descriptions on page 2 for further
information regarding wiring.
Note:
The power source needs to be NEC Class 2 or LPS. The PoE connection should be provided
by a UL Listed product and the connections shall be made in accordance with Article 800 of the NEC
or local regulations.
- End -
Procedure 3 Adjusting the camera position
Step Action
1
Use the security key to loosen the security torx screw on one side of the mount bracket so
that you can tilt the camera.
2
Loosen the screw on the retaining ring to adjust the camera angle.
3
After adjustments, fasten the screws and retaining ring back to the camera.
Figure 10 Adjusting the camera position
Procedure 4 Adjusting the sun shield hood
• Move the sun shield hood forward and backward to adjust the position of sunshade.
CAUTION
• Ensure to adjust the sun shield hood in coordination with lens in case of sunshade problems.
• To avoid damage to the housing of the unit, do not adjust the sun shield position excessively.
- End -
All manuals and user guides at all-guides.com
