Tyco Fire Protection Products AutoPulse Z-20, Руководство по установке

Страница: 2 / 12

Copyright and
Trademarks ©2016 Tyco Fire Protection Products. All rights reserved.
Specifications and other information shown were current as of publication and are subject to
change without notice. TYCO, AUTOPULSE and the product names listed in this material are
marks and/or registered marks. Unauthorized use is strictly prohibited.
Cautions
and Warnings
READ AND SAVE THESE INSTRUCTIONS
-
Follow the instructions in this installation manual. These instructions
must be followed to avoid damage to this product and associated equipment. Product operation and reliability depend upon
proper installation.
DO NOT INSTALL ANY AUTOPULSE® PRODUCT THAT APPEARS DAMAGED
- Upon unpacking your
AUTOPULSE product, inspect the contents of the carton for shipping damage. If damage is apparent, immediately file a claim
with the carrier and notify an authorized AUTOPULSE product supplier.
ELECTRICAL HAZARD
- Disconnect electrical field power when making any internal adjustments or repairs. All repairs
should be performed by a representative or authorized agent of your local AUTOPULSE product supplier.
FCC RULES AND REGULATIONS
-
PART 15
- This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
Copyrights, Trademarks, Cautions, Warnings, and Regulatory Info