Printed in U.S.A. 2-01
Flow Control
T y c o F i r e
P r o d u c t s
Ordering Information: When
placing an order, indicate the full
product name. Please specify the
quantity, model, style, orifice size,
temperature rating, type of finish or
coating, and sprinkler wrench. Refer
to price list for complete listing of Part
Numbers.
Teflon is a trademark of the DuPont Corp.
Ordering
Information
The Model H Recessed Pendent
Sprinklers
must be maintained and
serviced in accordance with the
following instructions.
NOTES
Absence of an escutcheon which is
used to cover a clearance hole, may
delay the time to operation in a fire
situation.
Before closing a fire protection
system main control valve for
maintenance work on the fire
protection system it controls,
permission to shut down the
affected fire protection systems
must be obtained from the proper
authorities. All personnel who may
be affected by this action must be
notified.
Sprinklers which are found to be
leaking or exhibiting visible signs of
corrosion must be replaced.
Automatic sprinklers must never be
shipped or stored where their
temperatures will exceed 100
°
F/
38
°
C and they must never be
painted, plated, coated or otherwise
altered after leaving the factory.
Modified sprinklers must be
replaced. Sprinklers that have been
exposed to corrosive products of
combustion, but have not operated,
should be replaced if they cannot
be completely cleaned by wiping the
sprinkler with a cloth or by brushing
it with a soft bristle brush.
Care must be exercised to avoid
damage - before, during, and after
installation. Sprinklers damaged by
dropping, striking, wrench twist/
slippage, or the like, must be
replaced.
The owner is responsible for the
inspection, testing, and mainte-
nance of their fire protection system
and devices in compliance with this
document, as well as with the
applicable standards of the National
Fire Protection Association (e.g.,
NFPA 25), in addition to the
standards of any other authorities
having jurisdiction. The installing
contractor or sprinkler manufacturer
should be contacted relative to any
questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a
qualified Inspection Service.
Care &
Maintenance
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and
workmanship when paid for and
properly installed and maintained
under normal use and service. This
warranty will expire ten (10) years
from date of shipment by Tyco Fire
Products. No warranty is given for
products or components manufactured
by companies not affiliated by owner-
ship with Tyco Fire Products or for
products and components which have
been subject to misuse, improper
installation, corrosion, or which have
not been installed, maintained,
modified or repaired in accordance
with applicable Standards of the
National Fire Protection Association,
and/or the standards of any other
Authorities Having Jurisdiction.
Materials found by Tyco Fire Products
to be defective shall be either repaired
or replaced, at Tyco Fire Products'
sole option. Tyco Fire Products neither
assumes, nor authorizes any person
to assume for it, any other obligation
in connection with the sale of products
or parts of products. Tyco Fire
Products shall not be responsible for
sprinkler system design errors or
inaccurate or incomplete information
supplied by Buyer or Buyer's repre-
sentatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY
OR UNDER ANY OTHER LEGAL
THEORY, FOR INCIDENTAL,
INDIRECT, SPECIAL OR CONSE-
QUENTIAL DAMAGES, INCLUDING
BUT NOT LIMITED TO LABOR
CHARGES, REGARDLESS OF
WHETHER TYCO FIRE PRODUCTS
WAS INFORMED ABOUT THE
POSSIBILITY OF SUCH DAMAGES,
AND IN NO EVENT SHALL TYCO
FIRE PRODUCTS' LIABILITY EX-
CEED AN AMOUNT EQUAL TO THE
SALES PRICE.
THE FOREGOING WARRANTY IS
MADE IN LIEU OF ANY AND ALL
OTHER WARRANTIES EXPRESS
OR IMPLIED, INCLUDING WARRAN-
TIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE.
Limited
Warranty
OBSOLETE
