14
14
4
Loading Material
4.
Loading Fanfold Labels
6
5
3
4
1
2
Fig. 8
Feed path of fanfold labels
Turn lever (1) counterclockwise to lift the printhead.
Loosen knurled screws (3), remove guides (4) from the axle (2) and re-mount the guides in such a way, that they
reach below the roll retainer (5).
Adjust the guides to the media width (
4.1.1 on page 12
).
Position label stack (6) behind the printer. Ensure that the labels on the strip are visible from above.
Push label strip between the guides (4) to print unit via the roll retainer (5).
Insert label strip into printhead (
4.1.2 on page 13
).
Set label sensor (
4.1.3 on page 13
).
Turn lever (1) clockwise to lock the printhead.
1.
2.
3.
4.
5.
6.
7.
8.
