409-10083
AMP 3K and AMP 5K Terminating Machines with the SL Starlite CQM
Rev E
38 of 38
Tyco Electronics Corporation
8.5. Installation of Precision Adjustment Kit 1424208-1
Refer to Customer Drawing 1424208, and install the optional precision adjustment kit as follows:
To avoid personal injury, electrical and pneumatic power must be DISCONNECTED at the source prior to
precision adjust kit installation.
1. Disconnect power to the machine.
2. Remove grease fitting from non–eccentric pin.
3. Remove two double setscrews from the top of the ram that retains the eccentric pin.
4. Pull the non–eccentric pin and replace with Eccentric Pin 354510–1.
5. Drive two slotted spring pins (PN 21920–5) into ram housing and attach indexing plate with two
socket head cap screws (PN 992285–1).
6. Assemble Adjust Lever 1320363–1 and install onto eccentric pin. Apply a thread–locking substance to
the threads, and tighten the setscrew.
7. Install the grease fitting (removed in Step 2) onto Eccentric Pin 354510–1. Lubricate the pin.
8. Adjust the shut height and crimp height as described in Paragraphs 7.2 and 7.3.
9. TROUBLESHOOTING
Contact the Tooling Assistance Center at
1–800–722–1111.
10. REVISION SUMMARY
Since the previous release of this manual, the hyphens in AMP 3K and AMP 5K were removed.
DANGER
