409-10083
AMP 3K and AMP 5K Terminating Machines with the SL Starlite CQM
Rev E
3 of 38
Tyco Electronics Corporation
Figure 1
AMP 3K 1725950-15
through 172950-24
AMP 5K 1725900-15
through 1725900-25
1. INTRODUCTION
This manual contains information on operation, preventive maintenance, and adjustments of the AMP 3K and
AMP 5K Terminating Machines 1725950–15 through –24 and 1725900 – 15 through –25 respectively. Each
machine has an SL Starlite Crimp Quality Monitor system installed on the machine. See Figure 1. An operation
manual is included in the machine’s documentation package for the SL Starlite monitor. Quick
references/descriptions to these machines can be found in Figure 2.
Both series machines (AMP 3K and AMP 5K) contain separate machines to produce a 30mm stroke or a
41.28mm stroke.
Descriptions in this manual pertain to the controls and adjustments on the AMP 3K and AMP 5K machines
only.
The various applicators that can be used in the machines are covered in applicator instruction sheets
packaged with each applicator. Applicator instruction sheets provide information on applicator installation, care,
and adjustment.
The specifications and requirements for the AMP 3K and AMP 5K Terminating Machines are as listed below:
–
Deflection: 0.13mm [.0046 in.] Maximum per 4,448 Newtons [1,000 lb] Crimp Force
–
Noise (Model 3K Series): Less than 76 dBa Typical at operator position with standard mechanical feed applicator
-
Noise (Model 5K Series): Less than 80 dBa Typical at operator position with standard mechanical feed applicator
–
Weight: 68 Kilograms [150 lbs]
–
Height: 610mm [24 in.] without reel supports
–
Electrical: (machine and Sarlite monitor) 100-240 Vac, 50/60 Hz, Single-Phase Current
–
Air: 620-760 kPa [90-100 psi], 2.83 liters/sec (6 scfm) When required for use with air-feed applicators
–
Physical Environment: Temperature: 4.4
°
-40
°
C [40
°
-104
°
F]
Relative Humidity: Less than 95% (non-condensing)
Transportation and Storage: Store in a clean, dry environment after coating all surfaces lightly
with a rust preventing oil.
