409-5880
Programmer Kit 356484-1 for FFC Terminating Machines 224910-[ ] and 318619-[ ]
Rev B
10 of 13
Tyco Electronics Corporation
Figure 11
ENTER P/N
P/N = (Part Number to Create)
F4 = MENU
2. Enter the part number (up to four digits) and enter the total number of conductors in the cable. See
Figure 12. Press ENTER. Pressing ENTER will result in the screen in Figure 13.
3. Press F1 (YES) if positions are to be skipped, or F2 (NO) if positions are
not to be skipped. See
Figure 13. If F1 is pressed, type each position to be skipped (Figure 14) and press ENTER after each.
The conductor closest to the operator (as it is installed in the FFC terminating machine) is in the first position.
Figure 12
P/N = (Part Number to be Entered)
ENTER # OF POSITIONS
F4 = MENU
Figure 13
P/N = (Part Number to be Entered)
ANY POSITIONS SKIPPED?
F2 = NO
F4 = MENU
F1 = YES
Figure 14
P/N = (Part Number to be Entered)
SKIP POSITIONS = ________
F3 = DONE
NOTE
i
