Page 11 / 14 ECOC: EGC0 ; LOC: AI
P/N 1-1579002-2
411-18506 Rev B
2.3 Notes on service and maintenance
This instruction sheet describes the use and the operating of the Stripping Hand Tool
P/N 1-1579002-2 with the interchangeable Stripping Blade P/N 3-1579005-7 as well as necessary
maintenance measures.
For further information and for technical assistance, please contact:
Kundendienst
Ampèrestraße 12-14
D-64625 Bensheim
3 Application
The stripping tool enabeles a high-quality stripping and dismantling of all single- and multi-wire cables for
wire sizes 0,14 to 6,0 mm².The stripping areas are sectional as followed: 0,14 – 0,25mm² / 0,75mm² /
1,5mm² / 2,5mm² / 4,0mm² / 6,0mm².
NOTE
Dimensions on this sheet are in millimeters “mm”. Figures and illustrations are not drawn to scale.
PROPER USE GUIDELINES
Cumulative trauma disorders can result from a prolonged use of manually powered hand tools. Hand
tools are intended for occasional use and low volume applications. For extended use or production
operations, Tyco Electronics offers a wide selection of powered application equipment.
NOTE
The hand tool may only be used for the described purpose!
SECURITY ADVICE !
Do not reach into the blade area! Danger of injury!
Remove stripping remainders with a tool, for example with a small screw driver.
